Quick Start Manual

89
Replacing the front panel board
www.gateway.com
Replacing the front panel board
The front panel board contains the actual LEDs, buttons, and ports that are
accessed from the front panel of your server.
To replace the front panel board:
1 Follow the instructions in “Preventing static electricity discharge” on
page 36. Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2 Remove the top rear panel. For instructions, see “Removing the top rear
panel” on page 41.
3 Remove the top front panel. For instructions, see “Removing the top front
panel” on page 43.
4 Unplug the three cables that are connected to the front panel board.