Quick Start Manual

87
Installing memory
www.gateway.com
4 Grasp the top of the memory board at the blue tabs, then pull the memory
board out of the server.
5 Lay the memory board onto a flat surface before removing or installing
memory modules. For more information on selecting a place to work, see
“Selecting a place to work” on page 36.
6 If you are replacing a memory module, pull the locking clips away from
the old module, then pull the module out of the memory slot.
7 Align the notch on the new memory module with the notch in a vacant
module slot, then press it firmly into the slot. The tabs on the sides of the
memory slot should secure the memory module automatically.