Quick Start Manual

75
Installing drives
www.gateway.com
7 Pull the bracket out of the server toward the front.
8 Insert the new bracket into the server, then reinstall the screw.
9 Reconnect the power and data cables to the bracket, then reinstall the fan
cage and fans.
10 Reinstall the top front and top rear panels.
Replacing the CD drive
To replace the CD drive:
1 Follow the instructions in “Preventing static electricity discharge” on
page 36. Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2 Remove the media drive bracket. For instructions, see “Replacing the media
drive bracket” on page 74.
Warning The drives in the media drive bracket are not
hot-swappable. Before removing the bracket, make sure
that the server is turned off and power cords are
unplugged.