Quick Start Manual

64
Chapter 4: Installing Components
www.gateway.com
Installing drives
Your server can contain as many as five SCSI hard drives. A tape backup drive,
CD drive, and diskette drive may also be included.
As you prepare to install drives, remember:
■ Before you install a drive, see the drive’s documentation for information
on configuring the drive, setting drive jumpers, and attaching cables.
■ You may need to configure the drives you install using the BIOS Setup
utility. Press F2 at startup to open the BIOS Setup utility.
Replacing a hot-swap hard drive
Use this procedure to add or replace hard drives in the hot-swap bay. Your server
supports as many as five 1-inch high 3.5-inch SCA SCSI hard drives. You can
purchase additional SCSI drives through your Gateway Sales or Technical
Support representative.
Drive 0
Drive 1
Drive 2
Drive 3
Drive 4