Quick Start Manual

117
Resetting the BIOS
www.gateway.com
6 Remove the top panel. For instructions, see “Opening the server case” on
page 41.
7 Place a jumper across the CMOS CLEAR (BIOS reset) jumper pins of
jumper JP4.
8 Turn on the server and let the operating system load, then turn off the
server. The BIOS settings are cleared.
9 Remove the jumper from the CMOS CLEAR jumper pins.
10 Replace all panels.
11 Turn on your server and restore the custom BIOS settings you recorded in
Step 3.
Warning Moving the jumper while the power is on can damage your
server. Always turn off the server and unplug the power
cords and all other cables before changing the jumper.
CLEAR CMOS
(BIOS reset) pin
s