User manual

GateWay Fax Systems, inc. Model 90si Secure Fax Gateway User's Guide
www.gwfs.com, 877-951-9800, [e-mail] help line: 877-951-9814 page 24
The following example shows how to change the default protocol to "Mil STD Handshake w/o FEC" (dened as
protocol 10)...
With the Secure Phone idle and only the Green "Power" light illuminated:
Procedure Response
Press and hold
the Reset button
on the 90si
... until both the Green and Red lights extinguish, then...
release Reset the Green light will be extinguished and the Red light illuminated
Take the fax off-
hook *1
(you will hear dial-tone)
10 on the fax you will a beep. (Note: 10 is the protocol code for Mil STD Handshake w/o
FEC. See the above list for the other codes.)
hang up the fax The Green light will blink a number of times. When it illuminated steady
the 90si is ready send using the Mil STD Handshake w/o FEC protocol.
Notes:
*1 Most fax machines have a button that when depressed, returns dial-tone from the telephone system. This
button is often labeled Hook, Manual Dial, Monitor, On Hook Dial or something to that effect. Find and use this
Hook button on your fax or use the handset. If your fax does not have a handset or a hook button you will need to
temporarily connect a plain old telephone to the TEL jack on the back of the fax machine to change Default Set-
tings.
39 Using a One-Time Transmit Protocol Code
A one-time protocol code allows you use a different protocol (than the default setting) for the current transmis-
sion only. The default protocol setting is not effected or changed. To use a One-Time protocol; get into secure data
mode with the unit you want to send to, take the fax off-hook, dial the desired One-Time Code and press the Start
or Send button. Once your crypto cycles back out of Secure Data mode, the 90si will return to the default settings.
Code One-Time Transmit Protocol
*10 Async 2400
*11 Async 4800
*12 Async 9600
*13 Async 19,200
*14 Mil-Std-188-161 Handshake w/o FEC (Sync)
*15 Mil-Std-188-161 Handshake with FEC (Sync)
*16 Mil-Std-188-161 Broadcast w/o FEC (Sync)
*17 Mil-Std-188-161 Broadcast with FEC (Sync)