User's Manual Part 3

G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 101
configurations, 8
cutting trench for, 21
finding defects, 68
installing, 22
locating, 93, 94
marking path for cutting, 20
material specifications, 77
on slopes, 9
splicing, 45
temporary unlock, 24
through an exterior wall, 20
through conduit, 22
through curbs, 41
through pvc, 43
troubleshooting with a tone generator and probe,
69
troubleshooting with the Tracker II, 70
with cart collection system, 9
perimeter striping, 31
sample site plan, 32
pourable crack sealant, 83
power alert relay, 30
Progressive Electronics tone generator and probe,
69
Q
Quick Start System Guide, 62
QuikRete Polyurethane Non-Sag Sealant, 88, 89
QuikRete Polyurethane Self Leveling Sealant, 86,
87
S
safety gear, 37
saw cuts, 21
cleaning, 95
cleaning and removing residue, 21
corners, 40
sealing, 23, 47, 80, 83, 84, 85
ScotchKote
spec sheets, 90, 91
using to seal wire splices, 45
SealMaster Cold Pour Sealant, 83
shopping cart stencils, 53
single locking loop, 8
single locking loop over building, 8
site diagram, 10
site plan
double saw cut locking loop, 13
lockbox and twisted pair combination, 14
single locking loop, 12
single locking loop over roof, 15
site survey, 6
checklist, 16
documentating, 10
photographing the site, 10, 11
splices, 45–47
locate existing, 70
striping
distance from antenna, 52
mask and paint, 52
paint for, 19
sample site plan, 32
step by step, 31
SW3, 29
system component requirements, 7
T
technical support, 63
Tempo Tracker, 93, 94
temporary unlock, 24
thermoplastic striping, 32
tone generator and probe, 69, 93, 94
Tracker II, 70
traffic loop, 14AWG wire, 77
training
GS2 training acknowledgement form, 60
store personnel, 59
training checklist, 96
transmitter mode, selecting, 29
Travelator, 3
Tri-American Cold Pour, 80
twisted pair
material specifications, 78, 79
twisted pair and lockbox combination, 8
U
unlock signal, 24
W
wheels
compatibility, 75
locking distance, 29
locking distance chart, 75
mixed environment, 74
wire caddy, 39