User's Manual Part 2

Troubleshooting
G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 67
Verifying Power to the CentralTransmitter
This flow chart is used to verify that there is an adequate power supply to the CentralTransmitter (CT). The flow
chart assumes that the store power is on and that there is a voltage output from the circuit breaker supplying the
CT is between 110V – 125V.
This flow chart can be used as a “stand alone” troubleshooting tool, but is most effective when used as part of
the main troubleshooting flow chart.