User's Manual Part 2

Indoor Cart Containment Systems
G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 59
System Layout with EAS System
In instances where there is an EAS system, it is best to configure the locking loop to be located either directly in
front or behind the EAS towers, or to wrap around the EAS towers (see diagram on page 40). Installations with
an EAS tower will require the locking line to be set to an output where the locking signal extends beyond the
range of the EAS tower signal interference. It is important that the unlock loop be placed NO LESS THAN FOUR
(4) FEET away from the locking line. It is best to use your SmartKey to determine the exact location where you
can recognize a locking signal and then place the unlock line a minimum of one (1) foot beyond that point.