User's Manual Part 1b

Installation
G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 27
Control Description
connector 31).
UPS Power Backup
connector
Front Panel connector Connects to the CT front panel indicator lights and control switches.
Perimeter Antenna connector Terminals for connecting the perimeter antenna to the CT.
Power connector Terminals for connecting the AC power lines to the CT.
Power Alert Relay connector Can notify a store system if power to the CT is cut off (page 31).
Voltage Selector switch 115/230 V selector. US settings are 115V.
SW5 On/Off switch Cuts power to the circuit board. Does NOT deenergize the system.
Fuse Current overload protection for the board (page 72).
CentralTransmitter Circuit Board
Actual Layout
Detailed photo of the GS
2
CT circuit board. Note that the actual placement of components may vary slightly with
different versions of the board.
Antenna Alert
Relay
Connectors
Power Alert
Relay
Connectors
UPS Power
Backup
Front Panel
Connectors
Perimeter Antenna
Connectors
Power
Connectors
Signal Strength
Adjustment
Fuse
SW3 Lock
Rotary
Selector
Mode Selector
Switch
SW4
Unlock