User's Manual Part 1b

Installation
G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 26
CentralTransmitter Circuit Board
Schematic diagram
Control Description
Mode Selector switch Specifies the type of signal (GS2 digital, analog, EP2000 or door mode) that will
be generated by the CT (page 30).
SW2 Rotary Selector switch Specifies single locking line or locking/unlocking lines (page 55).
SW1 Lock button Transmits a signal that locks all carts near the perimeter antenna.
SW4 Unlock button Transmits a temporary signal that unlocks all carts near the perimeter antenna.
Antenna Alert Relay Can notify an existing store system if the perimeter antenna is damaged (page