User's Manual Part 1b

Installation Photographs
G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 43
First create a trench in the
landscaping area and then drill
through the curb using the roto-
hammer drill
Using the roto-hammer, drill through the curb into the landscape area and then back from the landscape area
towards the asphalt. After the pilot hole is through, use a one-inch (1”) bit to ream out the inside of the bore to
accommodate the PVC pipe.
Make the saw cuts in the asphalt near the curb using a 4 1/2 inch (or larger) angle grinder.