User's Manual Part 1b

Installation Photographs
G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 42
Perimeter Antenna through Curbs
In some installations it is
necessary to transition from the
asphalt to a garden area. In these
instances, saw cut up to the curb
or island where the landscape
area begins. At the beginning of
the curb or transition, use a roto-
hammer to drill a hole from the
end of the saw cut through the
curb, down into the landscape
area. The path of the drill should
be at a 45º downward angle. Pass
the antenna from the saw cut,
through the curb, and into the
landscape area. Once in the
landscape area, route the antenna
wire inside schedule 40 PVC
conduit. The conduit should be
buried a minimum of 6” – 8”
inches in depth.
You will need a smaller diameter
bit for the pilot hole and a 1 inch
bit to enlarge the bore to
accommodate the PVC pipe.