User's Manual Part 1b

Installation
G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 37
Installing the Cart-Mounted Signs
Each shopping cart containing a GS
2
Wheel shall have a Cart-Mounted Sign Kit installed on it. If not installed by
the cart manufacturer, the Cart-Mounted Sign kits will be shipped to the store by Gatekeeper Systems.
Each sign kit will contain:
• two (2) black, rectangular frames, one of which will have a vinyl sticker with the warning language,
• four (4) screws.
For example, you will need 400 black plastic frames and 800 screws to install sign kits on 200 carts.
Tools required:
• Cordless screw driver, such as a Mikita cordless drill
• Phillips head screw driver tip (magnetic head helpful)
• Gatekeeper part number M-1210 (#8, ¾”, phillips head screw)
1. Sandwich together the two frames (they are all identical and have matching male/female posts) around the
wire of the front portion of the cart. Be sure that the warning language on the sign will face the customer, as
they push the cart.
2. Press the two frames together until you hear the snapping noise of the posts securely fastening to each
other.
3. Screw four (4) screws into the large opening on the Cart-Mounted Sign: two (2) screws on the inside of the
cart and two (2) screws on the outside of the cart.