User's Manual Part 1b

Installation
G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 33
Thermoplastic striping
In the event that weather conditions do not allow the application of paint, a Thermoplastic stripe may be applied.
These stripes typically come in 3’ x 4” sections and are applied to the asphalt using a blow torch. If the asphalt is
wet, it must first be dried using the blow torch. Once the asphalt is dry, the Thermoplastic stripe should be placed
and then heated with the torch until it completely adheres to the asphalt.
Sample Striping Layout Map
Striping locations are indicated on each of the “Sample Site Plans” in addition to the diagram below.
Site plan showing striping areas