User's Manual Part 1a

Installation
G
ATEKEEPER SYSTEMS INC.
2007
CART CONTAINMENT MANUAL
Page 18
4 Installation
Overview
Installation of the GS
2
System will require two to three field service technicians and may take up to four days,
depending on the size of the installation, site availability and weather.
It is recommended that work begin as early in the day as possible, while customer activity is light and the parking
lot is fairly empty. Prior to the day of installation, you will need to verify with your site contact when you can begin
your work.
This chapter contains the following sections:
• Required tools and materials
• Arriving on site
• Confirming the CentralTransmitter location
• Marking the antenna path
• Saw cutting the marked area
• Removing saw cut residue
• Installing the perimeter antenna
• Splicing the antenna
• Sealing the saw cut
• Mounting the CentralTransmitter
• CentralTransmitter front panel
• CentralTransmitter main circuit board
• Connecting electrical power to the CentralTransmitter
• Calibrating the CentralTransmitter
• Selecting the transmitter mode
• Connecting the alarm relays
• Information tracker
• Perimeter striping
• Installing the parking lot signs
• Installing the tilt bars
• Installing the GS
2
wheel
• Installing the cart mounted signs