CartManager Receiver Manual
Instructions to the User for FCC: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
GKS RECEIVER INSTALLATION FOR CARTMANAGER Remove the main leads to battery positive, negative and negative from the first battery before you start working for this installation. Removing the old receiver 1. Remove the top cover retaining screws at the top of the front control column cover and two bellow the Emergency stop button. Care fully lift the top cover a little being careful not to pull wires inside that are attached to this part 2.
GKS RECEIVER INSTALLATION FOR CARTMANAGER Remove the main leads to battery positive, negative and negative from the first battery before you start working for this installation. • • • 1) 2) 3) 4) 5) 6) 7) • • Install the receiver in the neck. Open the receive box cover Insert the antenna cables (E7003) and the wires to the old receiver box along with the 2 wires for the switch thru cord grips.
Contacting Gatekeeper Systems For more information about CartManager XD training and troubleshooting, or to order replacement parts or report an issue, contact the Gatekeeper Systems Inc. regional Customer Support office nearest to your location. USA Gatekeeper Systems, Inc. 2520 N. Great Southwest Parkway Suite 110 Grand Prairie, TX 75050 (888) 808-9433 Canada Gatekeeper Systems Canada, Ltd.
