98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 16 GASTROBACK ® Instructions for use Meat Grinder / Cookie Attachment Accessory Design Stand Mixer Advanced Art.-Nr.
d 98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp ! 11.12.2007 15:12 Seite 17 Carefully read all provided instructions before you start running the appliance and pay regard to the warnings mentioned in these instructions. Important Instructions • The appliance is designed for normal household quantities. Do not operate or store the appliance outdoors or in damp or wet areas. • Before use, always make sure that the appliance and accessory is properly and completely assembled.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 18 The Meat Grinder Attachment 9 8 10 7 6 3 1 2 4 5 12 11 1. 2. 3. 4. 5. 6. 7. 8. 9. spanner for the ring nut ring nut fine screen coarse screen scrape scroll housing tray food pusher 10. 2 litre storage container can be used as dust protection while storing the attachment or as meat tray when processing meat. 11. cookie attachment holder 12.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 19 Meat Grinder Attachment Operating Before first use of the Meat Grinder Attachment Remove all promotional materials and packing as well as any foreign objects, but do not remove the model label. Before first use and after a long period of storage, clean the processing tools in warm soapy water (see ´Care and Cleaning`).
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 5. Take the ring nut and screw it onto the thread of the housing turning it clockwise. You can use the spanner to securely tighten the ring nut (picture D/E). 15:12 Seite 20 D NOTE: Do not tighten the ring nut too much to avoid overwinding the thread. The Meat Grinder Attachment is now assembled and can be attached to the Design Standmixer Advanced. 6. Prop up the attachment access (picture F). 7.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 21 WARNING: Always make sure that the appliance is turned ´Off` before plugging in the power supply. 3. Plug the power supply cable into a mains socket. WARNING: Never hold your face or other body parts over the feed chute when the motor is running because little pieces of food could be thrown out of the feed chute.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 22 the provided spanner to loosen the ring nut. B 5. Take the screen, scrape and the scroll out of the housing (picture B). Care and Cleaning Clean the appliance directly after use and do not leave any food dry on the surfaces of the appliance.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 23 5. Wipe the appliance and power cord with a damp soft cloth. Take care not to spill or drip water or any other liquids on the appliance. 6. Thoroughly dry the appliance and all parts of the appliance and attachment after each cleaning. Leave all parts dry naturally where they are out of reach of young children. Clear a blocking If the outlet is blocked no mince comes out of the outlet while operating.
8101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 24 The attachment moves or loosened while operating. The attachment is not correctly assembled or not securely locked to the attachment access. Turn the appliance ´Off` immediately. Operate according to the instructions ´Assemble the Meat Grinder Attachment`. The food leaks out at the side of the ring nut. The ring nut is not screwed on tight enough. Turn the appliance ´Off` immediately and then pull the plug.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 4. Take the ring nut and screw it onto the thread of the housing turning it clockwise. You can use the spanner to securely tighten the ring nut (picture C). 15:12 Seite 25 C NOTE: Do not tighten the ring nut too much to avoid overwinding the thread. The Cookie Attachment is now assembled and can be attached to the Design Standmixer Advanced. D 5. Prop up the attachment access (picture D). 6.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 26 3. Plug the power supply cable into a mains socket. WARNING: Never hold your face or other body parts over the feed chute when the motor is running because little pieces of food could be thrown out of the feed chute. Never push the food into the feed chute with your fingers or put foreign substances (hair, towels, cutlery) into the feed chute.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 27 Dissemble the Meat Grinder Attachment 1. Switch ´Off` the appliance after use and disconnect the power supply cable from the mains socket. A 2. Take the tray out of the feed chute. 3. Press down the attachment ejector (picture A) and pull the Cookie Attachment out off the access opening. 4. Take off the ring nut by turning it anticlockwise. You can use the provided spanner to loosen the ring nut (picture B). B 5.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 28 a few minutes in warm soapy water and use a nylon cleaning brush or cleaning sponge for cleaning. Rinse all parts with running water and dry them accurately. 4. Grease the scroll, cookie attachment and multi-shaped blade with salad oil to prevent air corrosion. 5. Wipe the appliance and power cord with a damp soft cloth. Take care not to spill or drip water or any other liquids on the appliance. 6.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 29 Recipes Almond Cookies 125g 150g 250g 1 small 40g 1/2 teaspoon soft butter sugar flour egg ground almonds baking powder lemon essence (optional) Cream butter and sugar together using the beater until the mixture is light and fluffy. Beat in egg, then fold in the sifted flour, baking powder, nuts and lemon essence. Pass the mixture through the attachment, having selected the desired shape and cut into length.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:12 Seite 30 Accessories for the Design Stand Mixer Advanced You will get the accessories from your specialty retailer. Pasta Maker Attachment Art.-Nr.: 98100 Meat Grinder / Cookie Attachment Art.-Nr.: 98101 Food Slicer/ Shredder Attachment Art.-Nr.: 98102 Additional stainless steel bowl Art.-Nr.
98101_fleischwolfaufsatz_deskuechmaschadv_manual.qxp 11.12.2007 15:13 GASTROBACK GmbH Gewerbestraße 20 • D-21279 Hollenstedt/Germany http://www.gastroback.de • E-Mail: info@gastroback.
