Instruction Manual

48
Cleaning the paddle
1. Wash the paddle with warm soapy water. Using the bottle brush supplied insert this in the
central part of the paddle to clean all the ice cream out.
2. Let all surfaces dry thoroughly before reassembling the ice cream machine
Note: Paddle and lid are dishwasher safe on the top rack ONLY.
STORAGE
1.Ensuretheicecreammachineisturnedoff.Removepowerplugfromthepoweroutlet.
2.Ensuretheicecreammachineandallaccessoriesarecompletelycleananddry.
3. Place the ice cream bowl and paddle into the chamber.
4.Ensurethelidison.
5. Store the appliance in an upright position and level on it support legs. Do not store
anything on top of the ice cream machine.
WARNING: Young children must be supervised that they do not play with the appliance
or any part of it. When the appliance is not in use, always switch off. Thereafter, unplug the
appliance.
Always clean the appliance and all its parts before storing to avoid accumulation of dried-on
food. Additionally, this way, you avoid that the kneading paddle sticks to the driving shaft.
(See: ›Care and Cleaning‹)
Ensuretostoretheappliancewhereitisclean,dryandsafefromfrost,directsunlightandin-
admissible strain (mechanical or electric shock, heat, moisture) and where it is out of reach
of young children. Do not place any hard or heavy objects on or in the appliance or any part of it.
Alwayshandlepowercordswithspecialcare.Electriccablesmayneverbeknotted,twisted,
pulled, strained, or squeezed.
TROUBLESHOOTING
Problem Easy Solution
Ice cream won’t
freeze
•START|PAUSEbuttonneedstobepressed.
•Alcoholinicecream?Addedtoomuchortoosoon.
•Ensurethatthereisadequateventilationaroundtheicecream
maker. We recommend leaving at least 15cm between the ice cream
machine and adjacent hard surfaces.
Paddle won’t
move
•Paddlewon’tmoveifthePRE-COOLfunctionisselectedforthefirst
5 minutes.
•Checktoseeifcenterspindleisinsertedcorrectlyintoplasticpadd-
le; if the center spindle is not moving then there mayb maybe an issue
with the machine - Call Gastroback customer service.
Lid will not lock
into position
•Paddleandbowlarenotpositionedproperly–makesurethehandle
of the bowl sits within the grooves and paddle is inserted properly.