Operating instructions

30
always use only one of the provided grinding discs. Do not process bones, nuts, frozen
foods or any other hard items.
• Donotplacetheapplianceoranypartofitonornearhotsurfaces(e.g.burner,heater
or oven). Do not use any parts or tools of the appliance with any other device.
• Donotattempttogrindbones,nutsorotherharditems.
• Donotgraspinthegearholeofthemotorhousing,withtheapplianceconnectedtothe
power supply.
• Donotleavetheapplianceunattendedduringoperation.Alwaysswitchoff(ON/OFFbut-
ton) at first, then unplug the appliance, and wait until the motor comes to a standstill, before
moving, or cleaning, or assembling or disassembling any parts, or when the appliance is
not in use.
• Donotpressthereversebuttonbeforethemotorhascompletelycometoastandstill.
• Alwaysgraspthemotorhousingatbothsidesnearthebottomformovingorlifting.Do
not hold the appliance at the tray or cutter housing, for moving the appliance.
• Donotuseanyabrasivecleaners,cleaningpads(e.g.metalscouringpads),oranycorro-
sive chemicals (e.g. bleach) for cleaning. Do not immerse the motor housing or power cord
in water or any other liquid. Do not spill or drip any liquids on the motor housing, or on the
power cord to avoid risk of fire and electric shock. Do not pour any liquids in the feed tube
with the cutter housing connected to the motor housing! When liquids are spilled in the motor
housing, immediately unplug the appliance, switch off the appliance completely (ON/OFF
button), and wait for the appliance to cool down. Thereafter, clean and dry the appliance
thoroughly. (See: ›Care and Cleaning‹)
•Do notplace the applianceor anyof itsparts ortools inan automatic
dishwasher.
• Donotleaveanyfooddryontheappliance.Alwayscleantheapplianceaftereachuse
to prevent a build-up of baked-on foods (see: ›Care and Cleaning‹). Always keep the appli-
ance and the tools clean.
Important safeguards for electrical appliances
The appliance is driven electrically. Place the appliance near a suitable wall power socket to
connect the appliance directly to a protected mains power supply with protective conductor
(earth/ground) connected properly. Ensure that the voltage rating of your mains power sup-
ply corresponds to the voltage requirements of the appliance (220-240 V, 50/60 Hz, AC,
rated for at least 8 A). The installation of a residual current operated circuit breaker (r.c.c.b.)
with a maximum rated residual operating current of 30 mA in the supplying electrical circuit
is strongly recommended. If in doubt, contact your electrician for further information.
In various foreign countries, the specifications for power supplies are subject to incompatible
norms. Therefore it is possible that power supplies in foreign countries do not meet the requi-
rements for safe operation of the appliance. Thus, before operating the appliance abroad,
ensure that safe operation is possible.
• Donottouseanyextensioncordsormultisocketoutlets.
• Always handle the powercord with care. Alwayscompletely unwind the powercord
before use. Do not place the appliance on the power cord. The power cord may never be
knotted, twisted, pulled, strained or squeezed. Do not let the plug or power cord hang over