User Manual

Assembling the blender jug

Ensurethattheblenderjugandallunitsarecleanbeforeyou

assembletheappliance.

1. Toreassembletheblenderjug,replacethesiliconsealontothe

bladeassemblyhousing(pictureA).Ensurethesealingringis

inproperposition.Thesealingringhastobecleanandshow

nocrustifications,crinkles,cracksorlookporous.

2.Holdontothebladeassemblyhousingwithyourrighthand

andwithyourlefthandholdontothehandleoftheblender

jug.Upturntheblenderjug andinsertthebladeassemblyhousinginto the jug base

(pictureBandC).TwisttheBladeRemovalSystemanticlockwise

untilfirmlylockedintoposition.

WARNING:Thebladesareverysharp.Payattentionhandling

itandifpossibleonlyholdontothebladeassemblyhousing.

NOTE:Thebladeassemblyhousinghastwosmallguidingpins

thatfitinthematchinggapsofthebaseoftheblenderjug.The

bladeassemblyhousingisintherightpositionifitseatssolidlyonto

thebaseoftheblenderjugandwhenyoucantwistitanticlockwise.

NOTE: Ensure the blade assembly housing is securely locked

ontothejugbase.

The blade assembly housing and the sealing ring should be

properly connected to seal the bottom of the blender jug.

Otherwise ingredients will run right into the motorblock.

IMPORTANT: Do not tighten them withforce ortoo tightto

avoiddamagingtheapplianceorthesealingring.Ensurethe

sealingringisinpositionanddidnotfallintotheblenderjug

whenassembling.

ATTENTION:Ensuretheblenderjugisleak-proofbeforeputtingtheblenderjugon

themotorblock.Alwayswipeoffspilledliquidsimmediately.Neverletanyliquidsrun

intothemotorblockorunderneathittoavoidelectricshock.Whenliquidsarespilled

onthemotorhousing,immediatelyunplugtheapplianceanddrythemotorhousingto

avoidriskofelectricshockorfire.Do notattempttooperatetheappliance,when

liquidsareonorinthemotorhousing.

ATTENTION:Neverplacethe holder orthebladeonlyon themotorblock.Never

touchthedrivegearwhentheplugisconnectedtothepoweroutlet.Withoutthe

bladeassemblyhousingthebottomoftheblenderjugisopen.Spilledliquidsmight

runrightintothemotor.

ATTENTION:Whenliquidsarespilledonthemotorhousing,immediatelyunplug

theapplianceanddrythemotorhousingtoavoidriskofelectricshockorfire.Do

notattempttooperatetheappliance,whenliquidsareonorinthemotorhousing.