Datasheet

42
Technical specifications
Model: Art.-No.: 40979 Design Stand Mixer Advanced Pro
Power supply: 230-240 V AC, 50 Hz
Power consumption: 1.000 W
Length of power cord: ca. 1 m
Weight: 8 kg
Dimensions: ca. 41,5 x 20,0 x 35,5 cm (width x depth x height)
Capacity bowl: 4,7 Litre
Certification:
Troubleshooting
Problem Easy solution
Machine will not work when
switched “ON”
Always ensure the speed control dial is in the “Off” positi-
on before start.
The “thermo cut-off – Temperature Overload” protection
device has not been activated automatically, allow more
time for the motor to cool down.
Cannot set the time on the
count-down timer.
Always ensure the speed control dial is in the “Off” positi-
on before trying to set the count-down time.
Mixer suddenly switches off
during mixing.
The stand mixer has been stressed by overloading or
stalling. The stand mixer will automatically activate the
overload protection button and the unit will switch itself
off. When this happens it is recommended that the unit is
switched off at the power outlet and unplugged. The sa-
fety devices will the be reset and the Design Stand Mixer
Advanced Pro is ready to use again.
´E1` error message is flashing
on the count-up/down timer
display
The stand mixer will automatically stop operating if the
motor is stalled. If this occurs, the ´E1` error message
will flash on the count-up/down timer display. This is an
electronic safety feature. This is normally a result of too
much ingredients being processed at one time. Try remo-
ving some of the ingredients from the bowl. To continue
mixing, turn the speed control dial to the off position and
unplug the stand mixer from the power outlet. Then plug
the stand mixer into the power outlet and use as normal.