Datasheet

10. Clean the appliance in accordance to the instructions in chapter ›Care and cleaning‹.

Do not leave any food to dry on the surface of the appliance.

Processing guide for the chopper attachment:

food max. amount max. operation

meat 250 g 8 sec

herbs 50 g 8 sec

nuts 100 g 8 sec

cheese 100 g 5 sec

bread 80 g 5 sec

onions 150 g 8 sec

biscuits 150 g 6 sec

soft fruit 200 g 6 sec

CARE AND CLEANING

WARNING: To avoid injury to persons and damage, always release the ON-button, wait

for the motor to stop completely and unplug the appliance immediately after operation and

before laying down, dismantling or cleaning the appliance. With the appliance connected

to the power supply, do not touch the assembled tool with your hands or any objects.

Note: The blades are very sharp. Do not touch the blades. Always handle the tools by

the shaft.

DONOTclean themotorblock,thestainlesssteelblender,thewhiskhol-

der,thechopperlidorthepowercordinanautomaticdishwasher.Donot

immerse these parts in any liquids or spill any liquids on it. Always wipe

off spilled liquids immediately. Do not pour or drip any liquids on the motor

housing or power cord. Do not place the appliance on wet or damp sur-

faces.Whenliquidsarespilledonthemotorhousing,immediatelyunplug

the appliance and dry the motor housing to avoid risk of electric shock or

fire. Always handle with care and without violence.

CAUTION: Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfec-

tants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this

could damage the surfaces.

Note: after processing very salty ingredients clean the appliance immediately to avoid

stains and damage.

Carefully clean the appliance and the vessel with a damp sponge or cloth and warm soapy

water. Soak stubborn residues on the processing tools in warm dish-water for ca. 10 minutes

and then remove the residues with a soft washing brush.

1. Always release the ON-button, wait for the motor to stop completely and unplug the

appliance from the power outlet before cleaning.

CAUTION: Always handle with care and without violence. To disassemble the processing

tools, press both release-buttons to release the lock.