Operation Manual

35
English
8 Operation
8.1 Switching the appliance on
In order to switch on the appliance push the mains plug into the socket.
8.2 Setting the temperature
The temperature can be set at from 0°C to 10°C. It is set by pressing
the following buttons:
1. Press „SET“ button, the set temperature is displayed.
2. Press UP (warm) and DOWN (cold) button to set the new temperature.
3. Press „Set“ again to save and exit the adjustment.
4. If no more button is pressed within 10 seconds the actual cooler
inside temperature will be displayed.
NOTE
Please note that the temperature will change depending on the
ambient temperature (installation site), the frequency of opening
the door and the fi ttings.
IMPORTANT
High room temperatures (such as e.g. on hot summer days)
and a cold temperature setting can lead to continuous
refrigerator operation. The reason for this is that the
compressor has to run continuously in order to maintain the
low temperature in the appliance. The appliance is not able
to defrost automatically because this is only possible when
the compressor is not running (see the defrosting section).
Therefore, a thick layer of frost or ice may form on the rear
interior wall.




Up
Down
°C
SET
GCDC411_DC811_1011_UC311_Manual_DE_EN_NL_DIN A5_1611.indd 35GCDC411_DC811_1011_UC311_Manual_DE_EN_NL_DIN A5_1611.indd 35 06.12.2016 17:35:5306.12.2016 17:35:53