Brochure

Gastite Division, Titeflex Corporation
1116 Vaughn Parkway / Portland, TN 37148
800.662.0208 / www.gastite.com / [e-mail]
98
April 2015
FS™ S S
All System Components are CSA Approved
System Performance
Pressure Rating
Tubing:
Maximum Approved Operating Pressure 25 PSI
Tubing Minimum Burst Pressure 1500 PSI
Maximum Test Pressure 1/2" & 3/4": 150 PSI
1": 125 PSI
1-1/4": 100 PSI
1-1/2": 50 PSI
2": 40 PSI
Temperature Limits
Tubing:
Melting Point: 2400°F
Minimum Operating Temp -40°F
Maximum Operating Temp 160°F
Jacket:
Melting Point: 205°F
Minimum Operating Temp: -40°F
Maximum Operating Temp: 160°F
System Materials
Corrugated Stainless Steel Tubing
Tubing: ASTM A240 Type 304 Stainless Steel
Jacket: Flame and Smoke Rated Polyethylene meet requirements of ASTM E84 25/50
Fitting Material
Mechanical Joint Fitting:
Adapter: CA360 Brass
Nut: CA360 Brass
Split Bushings: CA360 Brass
Protection Devices
Striker Plates: 16 Gage AISI 1050 Carbon Steel Hardened to Rc 45 with Black Oil and Phosphate Coating
Floppy Conduit: Strip Wound Interlocking Steel (Heavy Wall)
Accessories
Valves: Meet requirements of ANSI/ASME B16.33 (125 PSI) or AGA 3-88 (5 PSI)
Regulators: Gas line pressure regulator std. ANSI/CGA Z21.80, CGA-6.22 with vent limiting device
Manifolds Cast: ASTM A47 32510 Malleable Iron
Welded: Welded IPS Schedule 40
Section 9: Dimensional and Technical Reference Data