Brochure

ManualsBrandsGastite ManualsHeating Specialties1/2" 90° Shut-Off Valve

Gastite Division, Titeﬂex Corporation • 1116 Vaughn Parkway • Portland, TN 37148

MULTI-PORT MANIFOLDS:

APPLICATION:

• Provides central distribution point for individual runs to each appliance.

MATERIAL / SPECIFICATIONS:

• Coated 4 Port – Welded IPS Schedule 40 pipe.

• Cast 3, 4, and 5 Port – ASTM A47 32510 Malleable Iron.

MULTI-PORT MANIFOLDS

Part No. Description Pkg. Qty. Lbs.

3-PORTMAN Cast 3 port – 3/4”F x 3 @ 1/2”F x 1/2”F 1 Ea. 1.5

3-PORTMAN-1 Cast 3 port – 1/2” x 3 @ 1/2”F x 1/2”F 1 Ea. 1.5

4-PORTMAN-10 Cast 4 port – 3/4”F x 4 @ 1/2”F x 1/2”F 10/Box 20.0

5-PORTMAN Cast 5 port – 3/4”F x 1@ 3/4”F x 4@1/2”F x 1/2”F 1 Ea. 2.2

5-PORTMAN-1 Cast 5 port – 1”F x 1@ 3/4”F x 4@1/2”F x 3/4”F 1 Ea. 2.5

5-PORTMAN-2 Cast 5 port – 1-1/4”F x 5 @ 3/4”F x 1”F 1 Ea. 6.7

5-PORTMAN-3 Cast 5 port – 1-1/4”F x 5 @ 1/2”F x 1”F 1 Ea. 5.7

4-PORTMAN-2 Cast 4 port – 1-1/2”F x 4 @ 3/4”F x 1-1/2”F 1 Ea. 7.2

4-PORTMAN-3 Cast 4 port – 2”F x 4 @ 1”F x 1-1/2”F 1 Ea. 8.6

111596-08 Coated Steel 4 Port – 3/4”F x 4 @ 1/2” F x 3/4”M 1 Ea. 1.9

Cast Manifolds

PIPE SUPPORT SYSTEM:

APPLICATION:

• Eﬀectively anchors and supports lightweight CSST, as well as other fuel gas piping materials to any rooﬁng membrane.

MATERIAL / SPECIFICATIONS:

• Made of 100% recycled material, UV resistant and waterproof.

• Will not damage expensive roof membranes.

• Installs on any roof with or without standard roof adhesives.

PIPE SUPPORT SYSTEM

Part No. Description Pkg. Qty. Lbs./Ea.

RB0-10-4 Rubber Support Block (10”L x 4”H) 1 Ea. 4.9

RB1-10-5 Rubber Support Block w/ 7/8” Galv Steel Channel (10”L X 5”H) 1 Ea. 6.0

RB1-29-5 Rubber Support Block w/ 7/8” Galv Steel Channel (29”L X 5”H) 1 Ea. 18.0

RB2-10-12 Rubber Support Block w/Adj height 7/8” Galv Steel Channel (10”L x 5”-12”H) 1 Ea. 7.7

Pipe Supports

PROTECTION DEVICES AND BONDING CLAMPS:

APPLICATION:

• Striker plates used for protection where ﬂexible gas piping passes through structural members and is restricted from

moving to avoid nails, screws and other potential puncture threats.

• Steel conduit is used to provide additional protection where striker plates cannot be easily installed.

MATERIAL / SPECIFICATIONS:

• Striker Plates – 16 gauge AISI1050 Carbon Steel Hardened to Rc 45.

• Steel Conduit – Strip wound interlocking steel.

• Bonding clamps are listed to UL467 for use on Gastite hex ﬁttings.

201

210

211

212

204

203

205

Striker Plates

PROTECTION DEVICES – STRIKER PLATES & SILICONE TAPE

Part No. Description Pkg. Qty. Lbs./Box

TFM204-100 Quarter Striker Plate – 3” x 2” 100/Box 8.0

TFM201-50 Half Striker Plate – 3” x 7” 50/Box 15.5

TFM203-50 ree-Quarter Striker Plate – 3” x 8” 50/Box 20.0

TFM205-25 Full Striker Plate – 3” x 12” 25/Box 13.8

TFM210-10 6” x 17” Striker Plate 10/Box 19.0

TFM211-25 Full (Drop-in) Striker Plate - 1/2” & 3/4” CSST 25/Box 11.0

TFM212-25 Full (Drop-in) Striker Plate - 1” & 1-1/4” CSST 25/Box 16.0

SIL-TAPE Self Bonding Silicone Yellow Tape – 1” x .015” x 12 yd/roll 1 Ea. 0.3

SIL-TAPE-B Self Bonding Silicone Black Tape – 1” x .015” x 12 yd/roll 1 Ea. 0.3