Instructions / Assembly
MAINTENANCE AND CARE
e area where the cooker will be used must be kept clear and free from combustible materials, gasoline and
other ammable vapors and liquids. Before each use of the cooker, inspect and remove any combustible items.
2. e ow of combustion and ventilation of air must not be obstructed. e cooker must be set in an open area
with 10 . (3.05m) of space on all sides and no roof or overhang overhead. Check the location and placement of
the cooker before each use.
3. Before each use of the appliance, check the burner/venturi tube for insects, insect nests, and other obstruc-
tions. A clogged tube can lead to a re beneath the appliance.
4. Follow all Lighting and Operating Instructfons each time the cooker is used. Check the ame for proper color
and appearance. e ame should burn with a primarily blue color. If a strong yellow ame is present, this could
indicate an obstruction in the burner/venturi tube. If there is any obstruction or a yellow ame, and the air shut-
ter adjustment has not solved the problem, turn o the cooker and allow time for it to cool. Disconnect the hose
from the cooker. Remove the air shutter using a Phillips head screwdriver. Check the venturi tube with a ash-
light to see if there is a blockage. If a blockage is present, use a wire such as a coat hanger to slide into the venturi
tube to remove the blockage. Reattach the air shutter to the venturi tube using the Phillips screwdriver. Assemble
and light the cooker again as per the instruction manual.
5. Always use the LP Hose/Regulator assembly supplied with the appliance. Before each use of the appliance
check the LP Hose for evidence of abrasion, wear, cuts or leaks. If there is any damage to the hose, the hose/regu-
lator assembly must be replaced prior to using the appliance. Visit www.gasone.com for information regarding a
replacement hose assembly. Only the LP Hose/Regulator assembly specied by Gas One should be used with the
appliance.
6. For parts that may have become damaged or lost, please reach out to Gas One customer support to purchase
replacement parts.
CLEANING THE APPLIANCE
1. Cooker & LP Hose/Regulator:
If necessary, remove any oil or liquid which has spilled onto the unit during cooking with mild soapy water on a
rag and towel dry. Do not immerse the burner unit or hose and regulator into water as this will cause rust.
2. Aluminum or Stainless Steel Pots:
Clean aer each use according to the directions on following page.
3. Cast Iron Cookware:
Clean aer each use according to the directions on following page.
4. ermometer:
Clean aer each use with mild soapy water and towel dry. Do not submerge in liquid or put in dishwasher.