User's Manual

76
WARNING
To reduce risk of electric shock, DO NOT
IMMERSE the Product in any liquid, or use
the Product near baths, basins, swimming
pool, shower area or other vessels containing
water or other liquids, or when standing
in or on damp or wet surfaces. If any
Electrical product falls into water, UNPLUG it
immediately; DO NOT REACH INTO THE
WATER. Do not immerse or expose the
Flexible Cord or Plug to rain, moisture or any
liquid. Important: Prior to reconnecting the
Power Supply, the complete Product should
be inspected by a qualied technician.
This Product should not be used/operated
in a conned space. Always use/operate
this Product well away from walls and
curtains. A re may occur when this Product
is in operation, if it is covered, or is close to
ammable materials, such as curtains, drapes
or wall coverings, etc.
To avoid overheating the Power Supply Cord,
completely unwind all the cord, including from
the cord storage area of product, if tted.
SERVICE & SAFETY
• This Product is shipped to you in a factory
sealed carton. Should the Product be damaged,
dropped, or malfunctions in any way, or its
Flexible Cord is damaged, return the complete
Product to the place of purchase.
• Always operate the Product as described in
these instructions.
Important: In some Products the replacement
by the user of the Flexible Cord is not intended.
Special Tools are required to disassemble the
Product or to replace the Cord, or a special Cord
is required.
Note: This transformer must only be used with
the light in your pizza oven.
OPERATING INSTRUCTIONS
1. Plug the Power Cord into a Power Outlet and
turn ON. To avoid damage to the Power cord,
make sure it is kept away from the Product
when in use.
2. When unattended, we recommend you
make sure the Product is turned OFF and
DISCONNECTED from the Power Supply.
3. When storing the Product, loosely coil the cord.
It is important to allow the Product to cool
before storage.
Important: Always operate the Product from a
power source of the same Voltage, Frequency
and Rating as indicated on the Product
Identication Plate.
CAUTION
DO NOT immerse the Product, its Flexible
Cord or Plug in water or any other liquid.
To reduce the risk of shock or damage to
the Product, DO NOT disassemble. No user
serviceable parts inside.
ELECTRICAL DATA
IMPORTANT
This product is tted with a sealed electrical
connection plug that is compatible with the
product, the mains supply for Australia and meets
the requirements of international standards. This
product must be connected to a supply voltage
that is equal to that stated on the rating label. If
the mains connection plug or power cord becomes
damaged it must be replaced with a complete
assembly that is identical to the original, and this
must be replaced by an authorised service centre.
Always follow the Australian requirements for
connection to the mains supply. If in doubt always
consult a qualied electrician.
Technical Specication
Model JT-12V
Voltage Input 220-240V AC 50Hz
Voltage Output 12V-20W