User Manual

76
HARDWARE
IMPORTANT: Remove any transit protection material before use.
TOOLS: Phillips Head Screwdriver
Adjustable Spanner
M6x40mm (x12) M6x12mm (x6) M5x12mm (x8) M6 Shoulder Screws (x8)
ASSEMBLY INSTRUCTIONS
STEP 1
Attach the legs to the body using 8 x M6x40mm screws ensuring the side shelf nutserts (circled) are on the outer edge
of the legs and the lower support beams using 4 x M6x40mm long screws. Screw the castors into the legs as shown.
M6x40mm (x12)