Assembly Instructions

2xB
2xD
Figure 8
Loosen the 3 screws already fitted to the left side of the BBQ body, and fit the keyhole slots on the inside face
of the Side burner assembly over them. Tighten the screws again.
Fit the Grid Baffle to the inside left of the BBQ with two screws and washers.
Figure 9
Carefully extend the flexible gas tube with the Side Burner base assembled to it, and fit to the bracket under
the body of the Side Burner Assembly with two pre-assembled screws. Ensure it is fitted centrally to the hole
in the Assembly.