Instruction Manual

BEFORE EACH USE, CHECK FOR LEAKS
After the connection is made between hose assembly
and BBQ valve, a leak test must be performed before
the BBQ can be operated in order to check that the
connections are gas-tight.
Never check for leaks with a naked flame, always
use a soapy water solution.
TO CHECK FOR LEAKS:
Make 1 cup of leak detecting solution by mixing one
part washing up liquid with 3 parts water.
Ensure the control valve is "OFF".
Connect the regulator to the cylinder ensuring that the
connections are secure, then turn ON the gas. Brush
the soapy solution onto the hose and all joints. If
bubbles appear, you have a leak, which must be
rectified by tightening the connections before use.
Retest after fixing the fault.
Turn OFF the gas at the cylinder after testing.
If leakage is detected and cannot be rectified, consult
your gas dealer.