Model No.
Model No.: B-5155 Tools needed for assembly: Adjustable wrench and screwdriver. * Actual products may differ from the picture shown above. WARNING This manual contains important information necessary for the proper assembly and safe use of the appliance. Read and follow all warnings and instructions before assembling and using the appliance. Keep this manual for future reference.
Model No.: B-5155 WARNING AND SAFETY TIPS 1. For outdoor use only 2. DO NOT attempt to take valve assembly apart. 3. Make sure the burner is used on a flat surface to reduce accidental tipping. 4. Never leave the burner unattended. If the burner is not watched carefully, the oil or water will continue to heat until it catches fire. Never move the fryer while in use or if the burner is still hot. 5. A fire can occur from overheated oil or grease. Oil may heat faster than expected. 6.
Model No.: B-5155 the appliance when hot after use [oil, grease or water above 100℉]. Heated liquid and equipment can remain at scalding temperatures long after cooking has ended. 28. Do NOT move the appliance when in use. Allow the cooking vessel to cool to 100℉ before moving or storing. 29. This appliance is not intended for commercial use. 30. Never drop food or accessories into hot cooking liquid.; Lower food and accessories slowly into the cooking liquid in order to prevent splashing or overflow.
Model No.: B-5155 INSTALLING PARTS 24QT Aluminum Steamer Pot Top Rack Holders Air Control Panel Bottom Rack 0-5PSI Regulator Burner Heavy duty burner with high-temperature paint. CSA certified regulator, hose and connector included.
Model No.: B-5155 OPERATION 1. The hose and regulator is a pre-assembled unit. DO NOT take apart. Simply connect the hose and regulator assembly to the LP gas cylinder and to the cooker. 2. Make sure the valve on the LP cylinder is clean. Connect the hose to the cylinder valve by turning the hand wheel to the right (Hand tighten). CAUTION: The control valve controls the “volume” of gas only. Use the valve on the propane tank to turn the gas supply on or off. 3. Connect the valve to the propane cylinder.
