OPERATOR’S MANUAL GG-FF25 Assembly & Operation Tools Required 1. 2. 3. 4. 5. 6. 1-1/16” Open End Wrench 1-14/” Open End Wrench Phillps Screwdriver PTFE Tape 10 mm Wrench 5 mm Hex Wrench Fig 1 Assembly 1. 2. 3. 4. 5. 6. 7. 8. Wrap all 3/4” NPT hose fittings with PTFE Tape. Remove handle should bolt using 10mm and 5mm hex wrenches. Mount filter support bracket assembly. It may be necessary to loosen bracket bolts before assembly. Tighten shoulder bolt and nut. (See Fig.
