User Guide

10
11
Desired Function Which Key to Press Notes
Advance Digits While Programming Start/Stop Hold for Fast Advance
Set Digits While Programming Mode
Escape From Programming Mode Mode for 1 Sec
Set Clock, Thermometer and Units Mode for 2 Sec In SPD/STP Screen
Set Wheel Size Mode for 2 Sec In SPD/ODO Screen
Main Programmable ODO Automatic at end of
Wheel Size Setting
Reset All Functions Start/Stop for 2 Sec In SPD/STP Screen
Reset Main Max Speed Only Mode for 2 Sec In SPD/MAX Screen
Enter Workout Window Workout window In any Screen
Workout Window Programmable ODO Mode for 2 sec In Workout Window SPD/ODO
Screen
Start Workout Window Start Stop while in Initial start only, subsequent
Workout Window starts and stops are automatic
Reset only Workout Window Start/Stop for 2 Sec In Workout Window SPD/STP
Functions Screen
Reset only Workout Window Mode for 2 Sec In Workout Window SPD/MAX
Max Speed Screen
TROUBLESHOOTING GUIDE
Problem Solution
No speedometer reading Check for proper magnet sensor alignment. Check computer to
make sure it is snapped firmly into the bracket.
Display Readout Fades Poor battery contact or dead battery-remove the battery, check
contactor replace battery.
Display shows irregular figures Press A/C button on the back of the unit to clear and restart
the computer.
MX display reads 99.5 Clear modes by pressing BOTH buttons in regular mode for 1 sec
ond, check wheel magnet/sensor alignment.
Slow display response Temperature outside of computer operating limits 32–120˚F
(0–49˚C)
Black display Computer unit too hot or display exposed to direct sunlight for too
long. Let the unit cool and it should return to normal.