Operation Manual

Chapter 3: Adjustment 28
FIGURE 36:
Quick-release lever
positions
1- Released (OPEN)
2- Adjustment position
3- Locked (CLOSE)
1
2
3
FIGURE 39:
Do not turn the lever
OPEN
OPEN
OPEN
OPEN
FIGURE 38:
Correct lever movement
FIGURE 37:
Tighten nut
1. Adjustment-nut
1
FIGURE 43:
Make sure the lever does
not turn
FIGURE 40:
Front lever position
FIGURE 41:
Rear lever position
FIGURE 42:
Test for loose condition
To remove a wheel with a
traditional quick-release
1. Release the quick-release lever; move it to the
OPEN position (Figure 36).
2. For the front wheel, decrease the tightness of
the adjustment-nut; turn it three turns.
3. Move the wheel out of the fork or the frame.