User Guide

TABLE 1 – WHEEL CLEARANCE
MINIMUM BRAKE ARCH MAXIMUM
CLEARANCE TIRE WIDTH
FORK MODEL (See Figure A) (See Figure B)
LUXE 15 mm 49 mm
SOUTH 30 mm 49 mm
SIX 5 mm 55 mm
AXEL 8.5 mm 60 mm
SPLICE 8.5 mm 60 mm
BLACK 8.5 mm 60 mm
SKAREB 5 mm 55 mm
MINUTE 8.5 mm 60 mm
NIXON 17 mm 65 mm
STANCE 12 mm 65 mm
SHERMAN 12 mm 65 mm
DORADO 180 185 mm 90 mm
DORADO 200 205 mm 90 mm
TABLE 2 – TRAVEL MEASUREMENT
FORK TRAVEL SEAL-TO-CROWN MEASUREMENT
LUXE 60 mm Around 110 mm
SOUTH 60 mm Around 90 mm
SOUTH 75 mm Around 105 mm
SIX 80 mm Around 110 mm
SIX 100 mm Around 130 mm
AXEL 80 mm Around 90 mm
AXEL 100 mm Around 110 mm
AXEL 120 mm Around 130 mm
SPLICE 80 mm Around 81 mm
SPLICE 100 mm Around 101 mm
SPLICE 130 mm Around 131 mm
BLACK 80 mm Around 85 mm
BLACK 100 mm Around 105 mm
BLACK 120 mm Around 125 mm
SKAREB 80 mm Around 96 mm
SKAREB 100 mm Around 116 mm
MINUTE 100 mm Around 112 mm
MINUTE 130 mm Around 135 mm
NIXON 145 mm Around 160 mm
STANCE 80 mm Around 95 mm
STANCE 100 mm Around 115 mm
STANCE 130 mm Around 155 mm
STANCE 150 mm (Single Crown) Around 187 mm
STANCE 150 mm (Dual Crown) Around 200 mm
STANCE 170 mm (Single Crown) Around 207 mm
STANCE 170 mm (Dual Crown) Around 220 mm
SHERMAN 150 mm (Single Crown) Around 187 mm
SHERMAN 150 mm (Dual Crown) Around 200 mm
SHERMAN 170 mm (Single Crown) Around 207 mm
SHERMAN 170 mm (Dual Crown) Around 220 mm
TABLE 3 – SAG MEASUREMENT
FORK TRAVEL SAG
60 mm 9 - 12 mm
75 mm 12 - 15 mm
80 mm 12 - 16 mm
100 mm 15 - 20 mm
120 mm 18 - 30 mm
130 mm 26 - 33 mm
145 mm 29 - 37 mm
150 mm 30 - 45 mm
170 mm 34 - 50 mm
180 mm 36 - 54 mm
200 mm 40 - 60 mm
TABLE 4 – OIL LEVEL HEIGHT
FORK MODEL OIL LEVEL
SOUTH 115 - 125 mm
AXEL 115 - 125 mm
SPLICE 115 - 125 mm
BLACK FFD, TPC 115 - 125 mm
BLACK SPV See Service Manual on Web
SKAREB FFD, TPC 115 - 125 mm
SKAREB SPV See Service Manual on Web
MINUTE See Service Manual on Web
NIXON See Service Manual on Web
STANCE (Single Crown) 85 - 95 mm
STANCE (Triple Clamp) 220 - 240 mm
SHERMAN See Service Manual on Web
DORADO See Service Manual on Web
TABLE 5 – DUAL CROWN SIZING
CUP-TO-CUP MEASUREMENT* DUAL CROWN SIZE
130 - 160 mm Small (flat upper crown)
155 - 185 mm Large (drop crown)
*Cup-to-cup measurement is the distance from the bottom of the lower headset
cup to the top of the upper headset cup.
TABLE 6 – RECOMMENDED TORQUE SPECIFICATIONS
ITEM TORQUE SPECIFICATION
DORADO INTEGRATED STEM 5.7 - 6.8 Nm (50 - 60 in-lb)
DORADO TRIPLE CLAMPS 11.3 - 12.4 Nm (100 - 110 in-lb)
SHERMAN / STANCE TRIPLE CLAMPS 9.0 - 10.2 Nm (80 - 90 in-lb)
HEX AXLE BOLTS (4 PLACES) 5.1 - 6.2 Nm (45 - 55 in-lb)
HEX AXLE THRU BOLT 2.8 - 3.4 Nm (25 - 30 in-lb)
BRAKE CALIPER 9.0 Nm max. (80 in-lb max.)
TABLE 7 – SPV PRESSURE RECOMMENDATIONS
RECOMMENDED
FORK MODEL INITIAL SETUP PRESSURE RANGE
All SPV fork models 40 psi 30 - 150 psi