User Guide

46
47CHAPTER THREE Inspection, Adjustment & Lubrication
The brake system allows you to slow or stop your bike, a
function critical to your safety.
These instructions explain how to inspect, adjust, and
lubricate a bicycle brake. Read the general information in
Braking system pointers- all systems as well as the specific
information for the type of brakes on your bike.
Brake system pointers- all systems
Different brake designs have varying amounts of stopping
power. If you are dis-satisfied, or uncomfortable, with the
stopping power of your bicycle brakes, consult your Gary
Fisher dealer.
With any braking system, failure to properly adjust, maintain,
and use your brakes may result in a loss of control and injury.
If you are unsure of the brake adjustment, or suspect any
problem, do not ride your bicycle; have your Gary Fisher dealer
service your bicycle.
The brake system is difficult to adjust properly without the
proper tools and training. It is strongly recommended that
adjustment of a brake be done by your Gary Fisher dealer. If you
need more specific information regarding your brake system,
contact your Gary Fisher dealer.
Some types of brakes are not compatible with some types
of brake levers. With any brake, use only levers recognized
as compatible, like those supplied with your bike. As an
example, direct-pull brakes (Figure 3.7.1) have increased
leverage and stopping power, requiring special brake levers
to manage the power.
If your bike is equipped with brake levers offering adjustable
braking force, read and follow the manufacturers instructions
supplied with your bike before making any adjustment to the
braking force.
BRAKE SYSTEMS
WARNING
Never ride a bike if you are not certain the brakes are working
properly, or you if suspect a problem with the brake cables, or
hydraulic hose. Malfunctioning brakes can cause you to lose
control and fall. If your brakes are not working properly, re-
adjust them or take the bike to your Fisher dealer for service.