User Guide

Sugar suspension setup for Cane Creek AD series
Cane Creek shocks also have two springs, and they work similarly to
the RockShox. The difference is that the Cane Creek is self-adjusting.
With a Cane Creek rear shock, pump up the pressure to around 25-35
PSI less than your body weight in pounds.
With models that provide damping adjustment, try 2-3 turns in from
fully fast.
This is a good place to start. You should experiment in small
increments to find what works best for your position, terrain, body
weight, and riding speed.
Lubrication
No lubrication is required for the shock or the pivot of your Fisher full
suspension bike. The pivot uses a Teflon impregnated composite bearing.
Avoid all lubricants as they may damage the composite bearing. For best results and long
life, simply wash the shock and pivot area with a solution of soap and water, or just water.
51
THREE
Inspection,
Adjustment
&
Lubrication
REAR SUSPENSION
Fig. 81
Fig. 80
Preload
adjusting
nut