Installation Guide

AIR CONDITIONER FEATURES
Displays
O O
Shows the set temperature in C or F and the
Auto-Timer settings. While on Fan-Only mode, it
shows the room temperature.
DISPLAYS:
-Evaporator temperature sensor error-Unplug the
unit and plug it back in. If error repeats, call for
service.
NOTE: is displayed as shown in the left picture.
HS -Electric heating sensor error-Unplug the unit and
plug it back in. If error repeats, call for service.
Error Codes:
AS-Room temperature sensor error-Unplug the unit
and plug it back in.If error repeats, call for service.
NOTE:In Fan-Only
mode, it will display LO or HI .
If the unit breaks off unexpectedly due to a power
failure, it will restart with the previous function setting
automatically when the power resumes.
DISPLAYS:
NOTE:
Now that you have mastered the operating procedure,
here are more features in your control that you should
become familiar with.
The Cool circuit has an automatic 3-minute
delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and
possible circuit breaker tripping. The fan will
continue to run during this time.
The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius. To convert
from one to the other, press and hold the left and
right Temp/Timer buttons at the same time for 3
seconds.
CAUTION
Clean your air conditioner occasionally to keep it looking
new. Be sure to unplug the unit before cleaning to
prevent electric shock or fire hazards.
Air Filter Cleaning
The air filter should be checked at least once a month to see
if cleaning is necessary. Trapped particles in the filter can
build up and cause an accumulation of frost on the cooling
coils.
20
Air directional louvers control airflow direction.Your air
conditioner has the 4-way directional system described
below. The louvers allow you to direct the airflow
vertically, horizontally, left, or right throughout the room
as needed. Use the center handles to adjust the air
directional louvers side-to-side until the desired left or
right direction is obtained. Pivot horizontal louvers with
your fingertips until the desired vertical or horizontal
direction is obtained. There are a total of 4 possible air
direction orientations available with this system.
ADDITIONAL THINGS YOU SHOULD KNOW
Air Directional Louvers
CARE AND CLEANING
Air Direction (4-Way)
Air Directional Louvers
Center Handles
Louvers