Installation Guide

NORMAL SOUNDS
All the illustrations in this manual are for explanatory purposes only. Your air
conditioner may be slightly different. The actual shape shall prevail.
NOTE:
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its
functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit
control alone or with the remote.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
(Cooling Only Models)
(Electric Heating Models)
18
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan
High-Pitched Chatter
High-efficiency compressors
may have a high-pitched chatter
during the cooling cycle.
Gurgle/Hiss
Gurgling or hissing noises may
be heard due to refrigerant
passing through evaporator
during normal operation.
Pinging or Switching
Water droplets hitting condenser
during normal operation may cause
pinging or switching sounds.
Vibration
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
REMOTE SIGNAL
RECEPTOR
TEMP/TIMER
Fan
Mode
Sleep
Timer
Check
Filter
Energy
Saver
Follow
Me
Auto
High
Med
Low
On
Off
Auto
Fan
Cool
Dry
TEMP/TIMER
Heat
TEMP/TIMER
Fan
Mode
Sleep
Timer
Check
Filter
Energy
Saver
Follow
Me
Auto
High
Med
Low
On
Off
Auto
Fan
Cool
Dry
TEMP/TIMER
TO TURN UNIT ON OR OFF:
Press ON/OFF button to t urn u nito n o r o ff.
Note: The unit will initiate automatically the Energy
Saver function under Cool, Dry, Auto (only Auto
-Cooling and Auto-Fan) modes.
TO CHANGE TEMPERATURE SETTING:
Press / UP/DOWN button to change
temperature setting.
NOTE:Press or hold either UP( ) or DOWN ( ) button
until the desired temperature is displayed.
This temperature will be automatically maintained
O O O O
between 62 F(17 C) and 86 F(30 C). If you want
the display to read the actual room temperature, see
To Operate on Fan Only section.