User manual

22
Garrett Metal Detectors
and COINS modes will return to the factory
settings when the detector is turned OFF.
3. PINPOINT Pushbutton—Press and hold the
Pinpoint pushbutton to determine the exact location
of a target that is still hidden in the ground, wall or
other structure.
When pinpointing, the Upper Scale on the LCD
Screen indicates signal strength. When the greatest
number of LCD segments (increasing left to right
on the scale) is shown, the center of the searchcoil
is directly over the target with the depth of a coin-
sized target shown on the depth scale.
To use the pinpoint function, move the searchcoil
to the side of the target's loudest audible tone.
Press the Pinpoint button and hold it down while
sweeping the searchcoil at a constant height over
the target area. Sweep the searchcoil side to side
and front to back at the lowest constant height to
locate the area causing the loudest signal. Watch
the bar graphs on the LCD Screen to also see the