User Manual

Page 7SeeLeveL RV App User Manual
NAME RV
Select Edit
This screen is accessed from
the “Edit” icon on the “Main
Display”, and allows you to
personalize your RV name.
Press “OK” to save the name,
or “CANCEL” to exit without
saving. The maximum length
of the name is 20 characters.
Enter a Name for your RV
This name is stored on the iOS
device, and is displayed on the
“Main Display” and “Find RV”
screens instead of the hardware
identication number.
Edit Option
Find RV Selection Screen
Main Display Screen
No Data/Stale Data
When the Main Display shows a
value of “---“ this is an indication
that no data is available for the
sensor. This is normal operation
when the app is rst started until
data values appear.
It can also be an indication
that you are out of range from
your RV and unable to establish
communication with the sensors.
No Devices
If no Garnet RV devices appear,
ensure that you are within 9m
(30ft) of the RV, and use the
“Refresh” icon or “Find RV” icon to
scan again for the RV.
Verify that Bluetooth is ON.
Ensure that the Garnet RV
hardware is powered ON.
TROUBLESHOOTING