GAN- 1021 ADSL MODEM I NSTALL GUI DE GARNET SYSTEMS CO.
Scaleable ADSL Modem Installation Guide Bef ore you st art St ep 1 – Gather system and service connection information System 1 Determining your Operating System 1Determining your Internet service protocol Determining your connection address and service configuration St ep 2 – Install the ADSL modem card Hardware installation St ep 3 – Install the drivers and establish an Internet service connection ADSL Connection mode selection Driver installation and Internet service connection.
Bef or e you St ar t ! The Installation Guide tells you everything you need to know to install and use the GAN-1021 ADSL modem card. This guide is designed to walk you through the installation of the GAN-1021 card and drivers, and then through the establishment of an Internet service connection. This is a (3) step process.
Version System Description Release Name Win 98 4.10.1998 Window 98 Win 98A 4.10.2222A 2 nd Edition Windows 98 2 nd Edition Win 5.00.2195 Windows 2000. DETERMINING YOUR INTERNET SERVICE PROTOCOL Your Internet service protocol will be one of the following. Contact your ADSL service provider if you are unsure of your service type.
! RFC2364 – Point-to-Point Protocol over ATM User Name Password Logon Domain VPI value VCI value VPI = ____ (Default VPI=0) VCI = ____ (Default VCI=35) ADSL Mode Type " ANSI T1.413 Issue 2 " ITU G.992.2 Annex A (G.lite) " ITU G.992.1 Annex A (G.dmt). St ep 2 – Install the ADSL modem card HARDWARE INSTALLATION WARNING! To avoid possible damage to your GAN-1021 card you need to use an anti-static grounding device or hold onto the metal chassis of the PC to provide anti-static grounding. 1.
St ep 3 – Install the drivers and establish an Internet service connection ADSL CONNECTION MODE SELECTION The GAN-1021 Multi-Mode Drivers will automatically determine the ADSL connection mode supplied by your ADSL service provider. If for any reason you require a mode setting different from the automatic default setting, you can manually set the mode as required. Please refer to Appendix E – ADSL Configuration – Select Protocol/Mode. The connection mode is one of the following: " ITU G.992.1 (G.
. The Service Options window now displays the Connection Address. Enter in the VPI, VCI and Framing values provided by your ADSL service provider. Click OK. NOTE: The default Framing setting is VC MUX. However, some ADSL service providers require LLC/SNAP. GARNET SYSTEMS CO.LTD. drivers also support LLC/SNAP. Please consult your ADSL service provider if you are unsure of the Framing setting or require more information. 8. The previous Service Option window will appear, click Next. 9.
RFC 2364 – POINT TO POINT PROTOCOL OVER ATM – WINDOWS 2000 After installing the ADSL modem card, plug the power cable back into the PC system and turn the power on. 1. After installing the ADSL modem card, power on the PC system. After start-up, the Found New Hardware Wizard will appear. Click Next. 2. Still in the Found New Hardware Wizard, select Search for a Suitable Device… Click Next. 3. Next you will be prompted to software drivers. Select Specify a location. Click Next. 4.
16. The Network Connection Wizard appears. You will be prompted for a phone number. Enter the phone number provided by your ADSL service provider. Click Next. 17. You will be prompted to select your user configuration, typically only for myself. Click Next. 18. The Network Connection Wizard appears. You will be prompted to name your Network Connection. The default is Dial-up Connection. Rename the connection as you choose and then click Finish..GAN-1021 Installation Guide 19.
7. The previous Service Option window will appear, click Next. NOTE: During the installation process you may be asked to insert your Windows 98 CD. Insert the Windows 98 CD into your systems CD drive and click OK. If during the file copying process a file is reported as “not found” enter the path and :\Win98 (e.g. D:\Win98) 8. The Add New Hardware Wizard appears, click Finish. 9. When the System Settings Change window appears and asks; Do you want to restart your computer now? Click Yes.
RFC 1483 – BRIDGED ETHERNET OVER ATM – WINDOWS 2000 After installing the ADSL modem card, plug the power cable back into the PC system and turn the power on. 1. After installing the ADSL modem card, power on the PC system. After start-up, the Found New Hardware Wizard will appear. Click Next. 2. Still in the Found New Hardware Wizard, select Search for a Suitable Device… Click Next. 3. Next you will be prompted to software drivers. Select Specify a location. Click Next. 4.
15. The Internet Protocol (TCP/IP) window appears. Under the General tab, enable Use the following IP address. The default settings for IP configurations will turn from gray to clear. Enter the IP address, Subnet Mask, and the Default Gateway supplied by your ADSL service provider. Click OK. 16. The previous General Tab window appears. Click OK.GAN-1021 Installation Guide 17. The Network and Dial-up Connection window appears. Close this window and your connection is complete.
NOTE: To enter the Domain search (DNS) entries, click Add then enter the address. Click Add to save the address. Repeat the process for additional DNS entries. 7. Click OK to update the changes. EDITING RFC 1483 INTERNET SERVICE CONNECTION W2000 1. At the Desktop, Right Click My Network Places, select and click on Properties. 2. The Network and Dial-up Connections window appears, Right click on the Local area Connection and select Properties. 3. Select the Protocols tab of the network window.
6. A warning message window appears " You are about to remove this device from your system", click OK to remove drivers or click Cancel to abort the driver Removal.. APPENIDX D - DIAGNOSTIC TOOLS ACCESSING THE DIAGNOSTIC TOOLS: The diagnostic tools allow the user to monitor the ADSL connectivity, setup the service connection address, and run diagnostic tests. The Diagnostic Tools icon is displayed on the task bar as shown.
ADSL STATUS window displays the current state of the GARNET SYSTEMS CO.LTD. ADSL connection, including current ADSL State, ADSL rotocol in use and the net data rates for upstream and downstream data. NOTE: ADSL protocols supported by the GARNET SYSTEMS CO.LTD. drivers are T1.413, G.dmt and G.lite. The protocol must be supported also by the ADSL equipment located at the central office. The GARNET SYSTEMS CO.LTD. drivers use the protocol that results in the most efficient ADSL connection..
A warning message pops up that the ADSL service will disconnect before performing the Diagnostic test. If connected to the Internet at this time, disconnect any Dial-up sessions. Click Yes to begin the diagnostic program or click No to exit diagnostic program. The iagnostic program performs a brief hardware check and displays the hardware status. If the GAN-1021 fails the Diagnostic tests (shown below), then record the test result and contact customer support.. CONNECTOR PIN-OUT The GARNET SYSTEMS CO.LTD.
1. In the Select Protocol & Rate section you shall find the ADSL Mode selection options. Select the ADSL mode(s) you require, by clicking in the selection box(s). " ITU G.992.1 (G.dmt) … … … ....referred to as G.dmt " ITU G.992.2 (G.lite)… … … ......referred to as G.lite " ANSI T1.413 … … … .................referred to as ANSI 2. After you select and check the mode(s) you require, click Set Protocol & Rate. Your new ADSL Mode settings are now in effect. 3.
