Instruction Manual
Table Of Contents
- Important Safety Information
- Tools Needed
- Mounting Considerations
- Installing the Transducer on the Perspective Mode Mount
- Installing the Transducer on a Trolling Motor Barrel
- Installing the Transducer on the Trolling Motor Shaft
- Installing the Transducer Using Low Profile Mounting Hardware
- Installing the Transducer on a Pole
- Mounting the GLS 10 Black Box Device
- Transducer Settings and Operation
- Appendix
Compatible Garmin chartplotter
1
LiveScope GLS 10 sonar module
Garmin Marine Network adapter cable (Garmin part number 010-12531-01)
Garmin Marine Network cable, small connector to NETWORK port
Water ground
7.5A, fast-acting fuse
NOTICE
Do not remove the fuse. Removing the fuse may cause the device to malfunction and will void the
warranty.
LiveScope GLS 10 power cable to POWER port
Transducer cable to XDCR port
LiveScope XR LVS62 transducer
Power Cable Extensions
If necessary, you can extend the power cable using the appropriate wire gauge for the length of the extension.
Item Description
Fuse
Battery
9ft. (2.7m) no extension
1
For chartplotter connections, refer to your chartplotter installation instructions.
17