Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Piper PA-46 Meridian
190-01842-00 Rev. A
63
Hazard Avoidance
Flight
Instruments EICAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Displaying Traffic on the Navigation Map
1) Ensure TIS is operating. With the Navigation Map displayed, press the
MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
Traffic Advisory System (TAS) or Traffic Collision Avoidance System
(TCAS1) (Optional)
System Self Test
1) Set the range to 2/6 nm.
2) Select the STANDBY Softkey.
3) Select the TEST Softkey.
4) Self test will take approximately eight seconds to complete. When
completed successfully, traffic symbols will be displayed and a voice alert
appropriate for the installed system will be heard indicating the test passed
(see Annuciations & Alerts section). If the self test fails, the system will
revert to Standby Mode and a voice alert appropriate for the installed
system will be heard indicating the test failed.
Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page. ‘OPERATING’ is
displayed in the Traffic Mode field.
3) Press the ALT MODE Softkey to change the altitude volume. Select the
desired altitude volume by pressing the BELOW , NORMAL , ABOVE , or
UNREST (unrestricted) Softkey. The selection is displayed in the Altitude
Mode field.
4) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
5) Press the MUTE Softkey to mute TAS voice alerts.
Displaying Traffic on the Navigation Map
1) Ensure TAS is operating.
2) With the Navigation Map displayed, press the MAP Softkey.
3) Press the TRAFFIC Softkey. Traffic is now displayed on the map.