Cockpit Reference Guide

Garmin G1000H Cockpit Reference Guide for the AgustaWestland AW119Kx
190-01515-00 Rev. B
46
Hazard Avoidance
Flight
InstrumentsEIS
Com/Nav/
XPDRGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
4) Press the ALT MODE Softkey to change the altitude volume. Select the
desired altitude volume by pressing the BELOW, NORMAL, ABOVE, or
UNREST (unrestricted) Softkey. The selection is displayed in the Altitude
Mode field.
5) Press the STANDBY Softkey to place the system in the Standby Mode.
‘STANDBY’ is displayed in the Traffic Mode field.
6) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
7) Press the FLT ID Softkey to enable or disable Flight ID displayed with the
intruder information.
System Self Test
1) With the Traffic Map Page displayed, set the range to 2/6 nm.
2) Press the STANDBY Softkey.
3) Press the TEST Softkey.
4) Self test takes approximately eight seconds to complete. When completed
successfully, traffic symbols are displayed and a voice alert is heard (see
Alerts and Annunciations section). If the self test fails, the system reverts to
Standby Mode and a voice alert is heard.
Displaying Traffic on the Navigation Map
1) Ensure TAS is operating.
2) With the Navigation Map displayed, press the MAP Softkey.
3) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
HTERRAIN AND OBSTACLE PROXIMITY
NOTE: Terrain data is not displayed when the aircraft is outside the installed
terrain database coverage area.
Displaying HTerrain and Obstacles on the Terrain Proximity Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Terrain Proximity Page.