Pilot's Guide

Garmin G1000 Pilot’s Guide for the Piper PA-44-180 Seminole
190-01461-00 Rev. A
372
HAZARD AVOIDANCE
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
tRaffic MaP Page DisPlay Range
The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the
RANGE Knob, as indicated by the map range rings.
Changing the display range on the Traffic Map Page:
1) Turn the RANGE Knob.
2) The following range options are available:
• 2 nm
• 2 and 6 nm
• 6 and 12 nm
ADDITIONAL TRAFFIC DISPLAYS
The Map - Traffic Map Page is the principal map page for viewing traffic information. Traffic information
can also be displayed on the following other maps for additional reference on the MFD when the traffic unit
is operating:
• Navigation Map Page
• Trip Planning Page
• Nearest Pages
• Active Flight Plan Page
Traffic information can also be displayed on the PFD when the Synthetic Vision Technology (SVT) option
is installed and enabled. See the Additional Features Section for details.
Displaying traffic information (MFD maps other than the Traffic Map Page):
1) Select the MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
When traffic is selected on maps other than the Traffic Map Page, the system shows a traffic status icon to
indicate traffic is enabled for display (Figure 6-107).
Displaying traffic on the Navigation Map
1) Ensure the traffic system is operating. With the Navigation Map displayed, press the MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic is now displayed on the map as shown in Figure 6-107.