Pilot's Guide
190-01461-00 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-44-180 Seminole
21
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Figure 1-16 INSET Softkeys
Press the BACK Softkey to return
to the top-level softkeys.
Press the BACK Softkey to return
to the top-level softkeys.
XPDR
STBY ON ALT VFR IDENT BACKADS-B TX MSGCODE
IDENT BACK
MSG
0 1 2 3 4 5 6 7 BKSP
BACK
Press the BACK Softkey to return
to the top-level softkeys.
DCLTR
DCLTR-2
DCLTR-3
DCLTR-1
WX LGND
TOPO
MSG
NEXRAD
(optional)
TERRAIN
XM LTNG METAR
(optional)
(optional)
OFF
INSET
STD BARO
BACK
MSG
WIND
HSI FMT
PFD
BRG
1
BRG
2
Press the BACK Softkey to return
to the top-level softkeys.
ALT UNIT
DFLTS
Press the BRG1/BRG2
softkeys to display/remove
the Bearing Information
windows and cycle through
bearing sources:
- NAV1/NAV2
- GPS
GND
INSET XPDR IDENT TMR/REF NRST MSGOBSPFD CDI
Press the CDI Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
DME
(optional)
DME
(optional)
SYN VIS
(optional)
HPA BACK
MSG
METERS IN
BACK
MSG
OPTN1 OPTN2 OPTN3 OFF
BACK
MSG
360 HSI
ARC HSI
TRFC-1
TRFC-2
MSG
SYN TERR
HRZN HDG
PATHWAY
APTSIGNS
PFD Displays second-level softkeys for additional PFD configuration
SYN VIS Displays the softkeys for enabling or disabling Synthetic Vision features
PATHWAY Displays rectangular boxes representing the horizontal and vertical flight path of the
active flight plan
SYN TERR Enables synthetic terrain depiction
HRZN HDG Displays compass heading along the Zero-Pitch line
APTSIGNS Displays position markers for airports within approximately 15 nm of the current
aircraft position. Airport identifiers are displayed when the airport is within
approximately 9 nm.
DFLTS Resets PFD to default settings, including changing units to standard
WIND Displays softkeys to select and configure wind data
OPTN1 Headwind/tailwind and crosswind arrows with numeric speed components
OPTN2 Wind direction arrow with numeric speed
OPTN3 Wind direction arrow with numeric headwind/tailwind and crosswind speed
OFF Removes wind information from display
DME Displays/removes the DME Information Window (optional)
BRG1 Cycles the Bearing 1 Information Window through:
NAV1: Waypoint frequency/identifier and distance information
GPS: Waypoint identifier and GPS distance information
OFF: Removes window
HSI FRMT Displays softkeys to select the HSI format
360 HSI Displays HSI as a 360° compass rose
ARC HSI Displays HSI as a 140° viewable arc (Bearing Information windows unavailable)
BRG2 Cycles the Bearing 2 Information Window through:
NAV2: Waypoint frequency/identifier and distance information
GPS: Waypoint identifier and GPS distance information
OFF: Removes window










