Cockpit Reference Guide

Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A
78
Hazard Avoidance
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Selecting an obstacle display range on the navigation map:
1) From the Home Screen on the Touchscreen Controller, touch Map > Map
Settings.
2) If necessary, touch the Land Tab.
3) Touch the Obstacle Data Button to enable/disable the Obstacle Data.
Obstable Data is enabled when the button annunciator is green, disabled
when gray.
4) Touch the current range button (10 NM is selected by default) to display
the Map Obstacle Range.
5) Scroll through the list and touch a range button to select the maximum
map range at which the system shows obstacle data.
Customizing the traffic display on the navigation map:
1) From the Home Screen on the Touchscreen Controller, touch Map > Map
Settings.
2) If necessary, touch the Sensor Tab.
3) Touch the Traffic Button to enable/disable the display of traffic. Traffic is
enabled when the button annunciator is green, disabled when gray.
4) Touch the Traffic Settings Button to select which traffic symbols are to be
shown:
- TA/RA Button - Displays Traffic Advisories and Resolution Advisories
- TA Only Button - Displays only Traffic Advisories.
- Standby Button - No traffic is displayed on the navigation map.
4) Touch the Map Settings Button to display the Symbols range button and
scroll to select the maximum map range at which traffic symbols are shown.
5) Touch the Traffic Labels Button to enable/disable the display of traffic
labels. Traffic labels are enabled when the button annunciator is green,
disabled when gray.
6) Touch the Traffic Label range button and scroll to select the maximum map
range at which traffic labels are shown.