Cockpit Reference Guide
Embraer Prodigy
®
Touch Flight Deck 300 Cockpit Reference Guide
190-01536-00 Rev. A 65
Flight Planning
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
ENTER AN AIRWAY IN AN ACTIVE FLIGHT PLAN
1)
From the Home Screen on the Touchscreen Controller, touch Flight Plan.
2)
Scroll the list if necessary and touch a waypoint selection button to display
the Waypoint Options Window.
3)
Touch the Load Airway Button to display the Airway Selection Screen.
4)
Scroll the list if necessary and touch an airway selection button to select the
airway and display the Select Exit Window.
5)
Scroll the list if necessary and touch an airway exit point selection button to
select the airway exit point and display the Airway Waypoint Sequence.
6)
Touch the Load Airway Button to insert the airway into the active flight
plan.
ACTIVATING PARALLEL TRACK
1)
From the Home Screen on the Touchscreen Controller, touch Flight Plan >
Flight Plan Options > Parallel Track.
2)
Touch the Left Button or the Right Button to choose the offset direction.
3)
Touch the Offset Distance Button to display the keypad.
4)
Use the keypad to select the offset distance.
5)
Touch the Enter Button to accept the distance, and return to the Parallel
Track Screen.
6)
Touch the Activate Parallel Track Button to activate the parallel track
function.
USER-DEFINED HOLDING PATTERNS
Creating a user-defined hold at an active flight plan waypoint:
1)
From the Home Screen on the Touchscreen Controller, touch Flight Plan.
2)
Scroll the list, if necessary, touch the waypoint at which to define the
holding pattern. The Waypoint Options Window is displayed.
3)
Touch the Hold at Waypoint Button. The Hold at Waypoint Window is
displayed.
4)
Touch the Turn Button, choose between Right or Left turn direction.
5)
Touch the Course Direction Button, and touch the Inbound Button or the
Outbound Button to select the course direction.
6)
Touch the Hold Entry Course Button to display the keypad. Use the keypad
and the Enter Button to select the entry angle.